Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Santa Clarita Homeowners
A cracked flue liner or a rusted-out chimney cap is not a problem that fixes itself. In Santa Clarita, where summer heat bakes masonry and the Santa Ana winds push rain sideways into exposed crowns, small chimney failures turn into wall stains, draft problems, and fire hazards faster than most homeowners realize. Flint Chimney Co Santa Clarita has handled chimney repair in this valley since 2002 as part of the Garrison Partners family, and every repair we make carries a written one-year guarantee. Hank Delano, who leads our Santa Clarita crew, insists on one rule above all: no tool comes off the truck until you have a written price in hand. Call (661) 430-6125 and we’ll put it in writing.
Key Takeaways
- Every repair gets a written price before work starts. No exceptions.
- Every repair carries a 365-Day Done Right Promise. If a covered repair fails within one year, we return and fix it at no charge.
- We work with professional-grade materials: DuraFlex, HeatShield, Olympia Chimney, and Copperfield, specified by job, not by margin.
- Live person answers the phone 24/7. Background-checked, uniformed technicians on every call.
Chimney Cap Installation
Chimney Cap Installation is the process of fitting a protective metal cover over the flue opening at the top of your chimney. The cap keeps rain out of the flue, blocks birds and squirrels from nesting inside, and stops downdrafts from pushing smoke back into your living room. We install caps in Santa Clarita year-round, but the busiest season runs October through January when homeowners fire up their fireplaces for the first time and realize the cap is missing or damaged. A standard stainless steel cap installation for a single flue in Santa Clarita typically runs $250 to $450 including the cap itself, while multi-flue caps for larger chimneys run $400 to $800. Flint Chimney Co Santa Clarita stocks caps from Olympia Chimney and Copperfield in common Santa Clarita flue sizes, so most installations are done in a single visit. Every cap installation includes a written price before we start and a one-year written guarantee.
Why a cap matters year-round
Rain entering an uncapped flue mixes with creosote and eats away at the mortar joints inside the chimney. In Santa Clarita, we also see a lot of roof rats in Stevenson Ranch and Canyon Country finding their way into uncapped flues. A correctly sized cap with an animal guard prevents both problems without restricting draft.
What we actually replace
On a new cap installation, we also check the flue tile below the cap. If the top flue tile is cracked or Spalling Brick Repair is needed, a cap alone will not stop water from getting behind the masonry. We’ll show you photos from our camera inspection before recommending anything beyond the cap itself.
Styles & brands we work with
Chimney Cap Replacement
Chimney Cap Replacement means removing a damaged, rusted, or incorrectly sized cap and installing a new one matched to your flue dimensions. You need replacement when the cap is pitted through with rust, the mesh screen has blown off, or the cap was sized wrong and is choking the draft. In Santa Clarita, sun and wind age galvanized caps fast, and many homes still have original caps from the 1990s that are well past their service life. A standard single-flue chimney cap replacement in Santa Clarita runs $200 to $400 including the new cap and labor. For multi-flue or custom copper caps, expect $500 to $900. We replace caps with Olympia Chimney and Copperfield units, chosen because their stainless and copper bodies hold up in high-wind, high-sun exposure. The written price you approve is the price on the invoice, and the cap carries our 365-Day Done Right Promise.
When replacement beats another repair
If a cap has rotted through in more than one spot or the mesh is separating from the frame, patching is a waste of your money. Replacement is also the right call when the old cap was installed without animal guard mesh and you are dealing with bird or rodent entry. A new cap resolves both in one afternoon.
The Santa Clarita wind factor
October through February, Santa Ana gusts over Magic Mountain and the Newhall Pass hit chimneys hard. A poorly attached cap lifts, bangs against the crown, or sails off entirely. We anchor every replacement with mechanical fasteners rated for wind loads in the Santa Clarita valley, not just a friction fit.
Chimney Liner Installation
Chimney Liner Installation is the process of fitting a new flue liner (the inner channel that carries smoke and exhaust gases safely out of the house) when the original clay tile liner has cracked, separated, or is missing. You need a new liner when a level 2 camera inspection shows gaps between flue tiles, when you are switching fuel type, or when a home inspection flags the chimney before a sale. Common jobs across Santa Clarita, Castaic, and Porter Ranch include stainless relining for open fireplaces and wood stove conversions. A standard stainless steel liner installation in Santa Clarita typically runs $2,500 to $5,500 depending on flue height, diameter, and accessibility. HeatShield resurfacing, which we use to repair damaged clay liners without a full tear-out, runs $2,000 to $4,000 in most Santa Clarita homes. We specify DuraFlex stainless liner kits and HeatShield materials because they hold up to the creosote and high heat of regular wood burning, and we install them to the manufacturer’s listed clearances. Every liner job includes a camera inspection after installation, photos for your records, and the written one-year guarantee.
Relining without a rebuild
Most Santa Clarita homes built in the 1960s through 1980s have clay tile liners that are now cracked from decades of hot fires. A full masonry rebuild is rarely necessary. A properly sized stainless liner inserted through the existing flue restores a safe draft and costs a fraction of a rebuild, and we can usually complete it in one day.
Why liner condition matters for home sales
Home inspectors in the Santa Clarita Valley regularly flag liner damage on older homes in Newhall and Saugus. Buyers ask for a level 2 camera inspection, and sellers get stuck choosing between a credit or a repair. Our written camera report gives both parties a real number and a real scope, which keeps deals from stalling.
Chimney Flashing Repair
Chimney Flashing Repair addresses the metal flashing (the thin sheets of aluminum, galvanized steel, or copper sealed where the chimney meets the roofline) when it leaks, lifts, or corrodes. Flashing is the number one cause of mystery water stains on ceilings and walls in Santa Clarita homes, and it fails slowly enough that homeowners often blame the roof first. You need flashing repair when you see water staining near the chimney chase, damp drywall in the room with the fireplace, or visible gaps where the flashing has pulled away from the brick. A typical chimney flashing repair in Santa Clarita runs $350 to $850 when the flashing can be resealed and re-anchored. When flashing sections need cutting out and replacing, expect $700 to $1,400 depending on roof pitch and access. Flint Chimney Co Santa Clarita works on the flashing, the counterflashing, and the reglet cuts in the masonry, and we seal with professional-grade roofing sealants that hold up to Santa Clarita summer UV. The work carries our written one-year guarantee.
What failing flashing looks like from below
Water follows the brick down inside the attic and shows up as a stain on the ceiling near the fireplace, sometimes months after the rain stopped. By the time the stain appears, the flashing gap has usually been open for a full season. If the stain is brownish, that’s water passing through creosote; if it’s clean, the flashing leak is probably newer.
Roofers versus chimney techs
Roofing companies handle roof flashing every day, but chimneys are a specialty. Counterflashing has to be cut into the mortar joints during Mortar Repointing, not surface-sealed, or it will leak again within a year. We grind out the reglet, seat the counterflashing properly, and tool the mortar clean, which is why our flashing repairs come with the same written guarantee as every other repair we make.
Chimney Crown Repair
Chimney Crown Repair restores the concrete or mortar slab (the crown) that covers the top of the chimney and sheds water away from the flue and masonry. A cracked crown lets water run straight down through the brick and mortar core, and in Santa Clarita’s freeze-thaw cycles, which do occur overnight in the higher elevations around Castaic and the Angeles National Forest foothills, those cracks grow fast. A standard chimney crown repair in Santa Clarita runs $500 to $1,200 when we can fill and resurface the existing crown. If the crown is too far gone and needs a full form-and-pour replacement, expect $1,200 to $2,500. We build crowns with a proper slope away from the flue, an overhang, and an expansion gap between the crown and the flue tile, because those three details are exactly what most original crowns in this valley are missing. Every crown repair carries our written one-year guarantee.
Spotting crown damage early
Look for hairline cracks spiderwebbing across the flat top of the chimney, or chunks missing along the crown edge. White efflorescence staining down the chimney face is another early sign that the crown is letting water into the masonry. Caught early, a resurface is a fast job; ignored, the same damage costs thousands in masonry rebuilds.
Why a proper crown slopes
Most original crowns on Santa Clarita homes were poured dead flat, so water pools and eventually seeps through. We form every replacement crown with a sloped surface that shed water to the drip edge, then seal it with a flexible crown coat that moves with the masonry through our hot-cold swing.
Chimney Repair Companies
Chimney Repair Companies in Santa Clarita range from one-man operations with a brush and a van to full-service firms with camera inspection equipment, code training, and written warranties. The difference matters most when the repair involves structural masonry, liners, or flashing, because the cost of getting it wrong is a house fire or a rebuilt chimney. Flint Chimney Co offers our Chimney Repair in Santa Clarita and has run under the Garrison Standard since 2002: written prices before work starts, background-checked technicians on every call, and a one-year written guarantee on every repair. For standard repairs like cap replacement or crown resurfacing, expect most Santa Clarita companies to quote between $300 and $1,500, with liner and masonry work running higher depending on scope. We recommend you ask any chimney repair company two questions before booking: will the price be written before work starts, and is the guarantee in writing for a full year. If the answer to either is no, get another quote.
What separates us from a fly-by-night
Hank Delano, who runs our Santa Clarita crew, has a simple test: the company either puts it in writing or they don’t. We put the price, the scope, and the one-year guarantee on paper before the first tool comes off the truck. No percentages, no verbal promises, no surprises.
How to compare quotes fairly
Two companies can quote very different numbers for the same crown repair because one is bidding a surface patch and the other is bidding a full form-and-pour. We show you photos from the camera inspection and explain exactly which tier of repair your chimney actually needs, so you can compare quotes on equal footing.
Chimney Masonry Repair
Chimney Masonry Repair covers the brick, mortar joints, and stone facing on the chimney structure itself: repointing (grinding out and replacing deteriorated mortar joints), brick replacement, partial rebuilds, and stucco or stone veneer patching. Santa Clarita masonry fails in two ways here: water intrusion from cracked crowns and flashing, and plain age on homes that have stood since the 1960s and 70s in Newhall, Saugus, and Canyon Country. A small repointing job on a typical Santa Clarita chimney runs $700 to $1,800. Replacing a run of spalled brick or rebuilding the top course below the crown runs $1,500 to $3,500. Full chimney rebuilds from the roofline up run $5,000 to $12,000 depending on height and access. We match mortar color and joint profile to the existing chimney so the repair blends, and we use professional-grade masonry materials specified for our valley’s wet-dry cycle. Every masonry repair carries our written one-year guarantee.
Repointing before brick replacement
Mortar is designed to be the sacrificial layer, and when it goes, it protects the brick from further damage by letting moisture evaporate through the joints. Once the joints are gone, water is trapped behind the brick face and the brick starts spalling. Repointing early extends the life of the chimney by decades and keeps the cost in the hundreds instead of the thousands.
Color matching matters
Nobody wants a patch of bright new mortar on a 50-year-old chimney. We test-match mortar color and rake out the old joints cleanly before tooling the new mortar, so the repair reads as part of the original chimney, not a scar. Done right, you notice the repair only by looking closely.
Brands We Service
We install and service chimney systems built around Olympia Chimney and Copperfield caps and components. Olympia Chimney stainless caps are our default for Santa Clarita replacement work because their mesh gauge holds up to birds, squirrels, and wind-driven debris far better than the thin mesh on budget caps sold at big-box stores. We stock common Olympia Chimney single-flue cap sizes on the truck so most cap replacements are complete in a single visit.
For liners, we specify DuraFlex stainless steel kits and HeatShield resurfacing. DuraFlex gives us a listed, heavy-gauge liner system that handles the creosote and heat of daily wood burning in Santa Clarita fireplaces, and it installs through the existing flue without ripping open your chimney. When a clay liner is damaged but still sound enough to save, we use HeatShield to resurface it into a smooth, continuous flue with a rated product instead of replacing the liner outright. Whether you have Olympia Chimney, Copperfield, DuraFlex, HeatShield, or any other make already on your chimney, we can inspect it, service it, and tell you honestly what it needs.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Water stains on the ceiling or wall near the chimney. This usually means flashing or crown failure, and the water has been working its way in for a while. The longer it goes, the more drywall, insulation, and framing gets saturated, not to mention the masonry damage spreading inside the chimney.
- White staining on the brick face. Efflorescence means water is moving through the masonry and leaving salt deposits behind. It’s a slow-motion sign of crown or mortar failure, and in Santa Clarita, it appears most often in January and February after our rain season.
- Crumbling mortar joints you can pick at with a finger. If you can scrape mortar with a fingernail, the joints are gone and water is getting behind the brick. We see this regularly on 1960s and 70s chimneys in Saugus and Canyon Country.
- Smoke backing up into the room on windy days. This often means a cracked flue tile, a missing cap, or a flue that’s partially blocked with creosote and debris. Downdraft problems worsen in the fall when Santa Ana winds hit the valley, and they’re a draft issue you cannot fix by cracking a window.
- An animal in the flue. Scratching, chirping, or nesting debris falling into the fireplace means the cap or its mesh has failed. Birds returning every spring will keep rebuilding, and the nest material is a fire hazard on the first fire of the season.
Our Process, Step by Step
- 1
Book the call and get a written inspection scope. A live person answers at (661) 430-6125 any hour of the day. We confirm the appointment window, and the technician arrives in uniform, background-checked, with the truck stocked for common Santa Clarita chimney repairs.
- 2
Inspection with the camera. We run a level 2 camera inspection on every repair call, not just rebuilds. The camera shows exactly what the flue liner, smoke shelf, and damper look like inside, and we take photos you can see yourself before any recommendation is made.
- 3
Written quote, down to the line item. You get a written price for the repair, including materials, labor, and disposal. The number on that sheet is the number you approve, and the number on the invoice. No add-ons, no upsells, no vagueness about what a given scope includes.
- 4
The repair, done to the Garrison Standard. We use the materials specified, install to manufacturer clearance and local code, and protect your roof, walls, and floors while we work. At the end of the day, we haul off scrap and debris and leave the site the way we found it, minus the broken chimney parts.
- 5
A written guarantee and a follow-up. Every repair carries our 365-Day Done Right Promise in writing. If a covered repair fails within one year, we come back at no charge. We also send a written summary of what was done, what we saw, and what, if anything, will need attention in a few years.
How Much Does Chimney Repair Cost in Santa Clarita?
A typical chimney repair in Santa Clarita runs $300 to $1,500 for cap replacement, crown resurfacing, flashing repair, and small repointing jobs, depending on how much Chimney Repair costs for your specific situation. Liner work is the next tier up: HeatShield resurfacing runs $2,000 to $4,000, and full stainless liner installation runs $2,500 to $5,500 in most local homes. Larger masonry projects, like partial rebuilds, run $1,500 to $3,500, and a full from-roofline rebuild can reach $12,000 on difficult or tall chimneys.
What moves the price: flue height and roof pitch (a steep roof on a two-story Castaic home costs more to access than a one-story Valencia rancher), the condition of the existing masonry, whether the flue needs a liner or just a resurfacing, and whether custom cap sizes or copper materials come into play. The best way to avoid overpaying is to get a written, line-item quote and compare it against another written, line-item quote. If one company gives a number over the phone with no inspection, that number is not worth much. Our free estimate includes the camera inspection, the photos, and the written quote, so you know exactly what you’re approving and what it will cost before any work begins. Call (661) 430-6125 for a free estimate.
Our Service Area Near Santa Clarita
Flint Chimney Co Santa Clarita serves the Santa Clarita Valley and the surrounding communities: Valencia, Saugus, Canyon Country, Newhall, Castaic, and Stevenson Ranch, plus the northwest San Fernando Valley including Reseda, Northridge, Winnetka, Canoga Park, Porter Ranch, Sylmar, Granada Hills, and Panorama City. Typical response is one to three business days for non-emergency repair work, and we’ll book a window that works around your schedule, not the other way around. For homeowners in the San Fernando Valley, our crews coordinate with our Chimney Repair in Reseda and Chimney Repair in Northridge service areas. Chimney Repair in Santa Clarita is our home base, and you can always reach us through our home page.
Serving Santa Clarita, CA - Our Local Coverage Area
We’re based in the Santa Clarita area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Repair in Santa Clarita
Chimney repair is any work that restores a chimney to safe, functional condition: replacing caps, repairing crowns and flashing, resurfacing or relining flues, and rebuilding damaged masonry. The repair is needed when components fail and the chimney can no longer safely contain exhaust gases or keep water out of the structure. In Santa Clarita, our most common repairs are cap replacement, flashing repair, and crown resurfacing. Call (661) 430-6125 and we’ll camera-inspect yours before recommending anything.
Most cap replacements, flashing repairs, and crown resurfacing jobs are done in two to four hours on site. Liner installations are usually a one-day job, and larger masonry repairs run one to three days depending on scope and weather. We schedule in a set window and show up inside it, and the written quote lays out the time frame before work begins.
Most repairs fall between $300 and $1,500 for caps, crowns, flashing, and small masonry work. Liner work runs $2,000 to $5,500, and full rebuilds can reach $12,000 on hard-access chimneys. The free written quote you get from us is the number you pay, no exceptions. Call (661) 430-6125 for the exact number on your chimney.
Yes. We install Olympia Chimney and Copperfield caps and DuraFlex liner systems. If your chimney already has these products, we’ll service them; if it has another brand, we’ll inspect it and tell you straight up what it needs. We’ll also recommend the right material for your job, not whatever is most profitable for us.
A chimney leak that is actively dripping into the house should be addressed promptly, because the water damage compounds every time it rains. We’ll prioritize active leaks and get a technician to your Santa Clarita home as quickly as the schedule allows, often within one to two business days. For an active leak, call (661) 430-6125 right away.
Every repair from Flint Chimney Co Santa Clarita carries our 365-Day Done Right Promise in writing. If a covered repair fails within one year, we return and make it right at no charge. The guarantee is written, it’s for a full year from the service date, and it’s included on every job regardless of size.
Clear the area around the fireplace by moving furniture, rugs, and anything fragile a few feet back. Keep pets in a separate room during the visit, and make sure we can reach the roof with a ladder, which means clear access to the side of the house nearest the chimney. We’ll handle everything else, including tarps and floor protection.
Schedule Your Chimney Repair Service in Santa Clarita Today
When you’re ready, call (661) 430-6125 and we’ll get your free estimate scheduled. A live person answers around the clock, and the written quote you receive is the price you’ll pay. Every repair is backed by our 365-Day Done Right Promise, in writing, on every job. No-pressure, no vague assurances, just a straight answer and a repaired chimney.
Written by Hank Delano, Owner at Flint Chimney Co Santa Clarita, serving Santa Clarita since 2002.