Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Olympia Chimney Chimney Sweep in Santa Clarita: What to Know First
An Olympia Chimney chimney sweep in Santa Clarita typically runs $189 – $329 for a standard open-hearth fireplace, with most jobs completed the same day and finished before we leave. We’re Flint Chimney Co Santa Clarita, an independent Olympia Chimney service provider, and we give you a written price before any work starts, so the number we quote is the number you’ll see on the invoice. If you own an Olympia Chimney fireplace or stove and it’s been a year or more since the last sweep, call (661) 430-6125 for a free estimate. This page is for Olympia Chimney owners in Santa Clarita, Stevenson Ranch, Valencia, and Canyon Country who want to know what a sweep costs, why their Olympia unit may be behaving the way it is, and what we do differently on these specific products.
How Olympia Chimney Products Fail – and How We Fix Them
Olympia Chimney builds solid, serviceable hearth systems, but they fail in patterns we see often enough across Santa Clarita to know what we’re walking into before we knock. Here are the five most common failure modes on Olympia Chimney units that a proper sweep addresses, each one something we’ve seen on jobs in this valley more than once.
- Creosote bridging above the offset in Olympia factory-built fireplaces. Factory-built systems like the Olympia Wonderfire and Olympia ZC lines use angled flue offsets that collect a hard, shiny creosote crust where the pipe changes direction. In Santa Clarita’s dry winters, this crust bakes on fast, and a brush won’t break it loose. We remove it with a rotating poly whip designed for factory flues, not a wire brush that can score the inner wall.
- Warped bimetallic damper plates on Olympia stainless flue components. Some Olympia flues ship with a bimetallic damper plate that’s meant to close automatically under heat. After several hundred fires, the plate warps enough to stick halfway open, which lets heat escape and sends smoke back into the room. A sweep won’t fix the warp, but our inspection catches it early, before you’re paying for draft repair on top of cleaning.
- Ceramic fiber blanket breakdown in Olympia refractory-style liners. Olympia’s refractory-lined flues, common in homes built in the 2000s in Stevenson Ranch, use a ceramic fiber blanket that breaks down into fine dust as it ages. You won’t see it from the hearth, but the dust settles into the firebox and gets pulled into the house. Our sweep includes vacuuming out the firebox and smoke shelf, where that material collects, and we can tell you whether the liner has years left or needs a reline.
- Creosote glaze binding to the Olympia flex liner’s corrugations. When an Olympia fireplace or stove is retrofitted with an Olympia flex liner, third-stage creosote glaze sticks in the corrugation grooves and resists standard brushing. We run a chemical creosite treatment followed by a mechanical sweep on those jobs, and we schedule a follow-up sweep within a shorter window if the glaze is advancing.
- Ash-pan gasket failures on Olympia wood-burning inserts. Olympia wood-burning inserts have an ash-pan gasket that gets brittle from repeated heat cycles and lets air in where it shouldn’t, which burns your fire faster and sends more unburned material up the flue. We replace the gasket as a standard part of our sweep service when we spot one that’s crumbling, and we quote it before we touch it.
Styles & brands we work with





Our Olympia Chimney Chimney Sweep Process
We run the same documented process on every Olympia Chimney job, whether it’s a standard annual sweep in Valencia or a full Level 2 inspection on a hillside home in Stevenson Ranch. Here’s what it looks like from your phone call to our final walk-through.
- 1
Call and scope. You call (661) 430-6125, and a live person answers. We ask what Olympia model you have, when it was last swept, and whether you’ve noticed drafts, smoke rollback, or odor. We book a window and the tech arrives inside that window, in a company uniform with background check on file.
- 2
Drop cloths and floor prep. We lay heavy canvas at the hearth and run a covered hose to an outside-venting HEPA vacuum. That vacuum stays running for the entire job, and the filter traps dust down to 0.3 microns so nothing drifts into your living room.
- 3
Hand inspection before tools. We check the damper plate, the flue walls, the firebox refractory, and the ash-pan gasket. We photograph what matters, and we show you the images before we quote anything beyond the sweep you already approved.
- 4
Mechanical sweep matched to your flue type. For Olympia factory-built flues, we use a poly brush or rotating whip, never a steel brush that can score stainless liners. For refractory flues, we adjust pressure to avoid cracking the ceramic fiber. We sweep from the top down where possible, and we clean the smoke shelf and damper assembly by hand from below.
- 5
Creosote removal and firebox cleanup. We remove loose soot and creosote from the firebox, clean the ash-pan channel, and check the gasket. If the gasket is spent, we quote a replacement and install it the same day, if you choose.
- 6
Test fire test and written guarantee. We light a small test fire to confirm draft direction. Then we hand you a written invoice that matches the quote, and every repair we performed carries our 365-Day Done Right Promise for a full year. If a covered repair fails in that time, we return at no charge.
See the difference
Before
After
Before
After
Before
AfterWhat Olympia Chimney Chimney Sweep Costs in Santa Clarita
A straightforward Olympia Chimney fireplace sweep in Santa Clarita runs $189 – $259 for an open-hearth unit with no surprises. Level 1 inspections with the sweep run $249 – $329, and a Level 2 inspection (typically needed for real estate transactions or after a chimney fire) runs $349 – $499. Here’s how pricing breaks down for the jobs we see most on Olympia Chimney products in this area:
- Standard open-hearth sweep: $189 – $259
- Sweep plus Level 1 inspection: $249 – $329
- Sweep plus Level 2 inspection: $349 – $499
- Creosote treatment for glazed buildup: $95 – $145 add-on
- Ash-pan gasket replacement: $45 – $85 depending on model
What moves the price: heavy glaze that requires chemical treatment, a flue liner that’s never been swept since installation, or an insert that needs the blower assembly removed to reach the flue. We give you a written price before we start any work, so there’s no door-knock adjustment. Call (661) 430-6125 for an exact quote on your Olympia unit, and we’ll have the estimate ready before you commit.
Why Santa Clarita Homeowners Call Flint Chimney Co Santa Clarita for Olympia Chimney Work
We’ve been part of the Garrison Partners family since 2002, and we operate under The Garrison Standard, which means every job gets a written price first, every repair carries a one-year written guarantee, and every covered repair that fails in that year gets a second visit free. Hank Delano runs the crew in Santa Clarita, and he’s the one you’ll hear on the other end of the inspection report when a flue liner is cracked. We don’t soft-pedal it and we don’t upsell you. We show you the camera images and tell you straight what needs to be done now and what can ride. Clean flue, honest price – that’s the whole job. When an Olympia part is the right call, we use it. When a DuraFlex liner is the better fit for a reline, or a HeatShield resurfacing job makes more sense than tearing out refractory, we quote that instead. We also work with Gelco sealants on chase-top repairs where they’re the right material, and we’tell you why.’
FAQs
A clean, professionally swept flue won’t void your Olympia Chimney warranty, and skipping the sweep is far more dangerous to your coverage than sweeping it, since the manufacturer’s own maintenance guidance calls for annual inspection and cleaning as needed. We’re an independent Olympia Chimney service provider, so the work we do is documented with photographs and a written report your manufacturer can review if a warranty claim ever comes up. For a free estimate on your Olympia unit, call (661) 430-6125.
No, and that’s by design. We use Olympia parts when the Olympia part is the best option for your repair, but we also carry and install DuraFlex liners, HeatShield resurfacing systems, Gelco sealants, and Famco and Copperfield components when they’re the better material for the job. We’ll tell you the brand we’re quoting and why, and we’ll put it in writing before we start.
Once a year, at minimum, and more often if you burn through the cooler months. Santa Clarita homes in Stevenson Ranch and the older hillside areas tend to run fireplaces hard from November through February, and the creosote accumulates faster than the flatland desert homes. If you’re burning two to three cords a season, schedule a mid-season inspection and a spring sweep before the unit sits idle for summer.
We photograph the damage, show you the images on the spot, and explain what it means for your safety and what it’ll cost to fix. Then we write a quote and let you decide. Nothing gets repaired without your written approval, and the price we write is the price you’ll pay.
Written by Hank Delano, Owner, Flint Chimney Co Santa Clarita at Flint Chimney Co Santa Clarita, serving Santa Clarita and nearby areas.