Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across San Fernando
A chimney inspection in San Fernando costs $149 for a standard Level 1 visual check and $249 – $389 for a Level 2 camera inspection, depending on the size and condition of the flue. Most inspections take 45 to 90 minutes on site, and you’ll get a written report with photos the same day. If you own one of the many 1940s – 1970s ranch homes in this city, your chimney likely has original clay tile liners and mortar joints that deserve a close look. Call (661) 430-6125 to schedule.
Our crews know San Fernando’s housing stock. We see the same brick chimneys on Celis Street that we see off Truman and San Fernando Road. That local familiarity matters when you need an honest read on whether a crack is cosmetic or something to address. We put the price in writing before any work begins, and every repair carries a 365-day guarantee.
Why Flint Chimney Co Santa Clarita Is San Fernando’s Preferred Chimney Inspection Company
Hank Delano runs our inspection team with a simple rule: no repair recommendation gets made without photographic evidence the homeowner has seen. That matters in San Fernando, where the older neighborhoods are full of chimneys that have been standing since before Interstate 5 cut through the Valley. We have inspected hundreds of mid-century brick stacks in this city, and the discipline never changes. Written price first. Camera on every questionable flue. Report in your hand before we leave the driveway.
Our technicians are background-checked and uniformed, so you know exactly who is walking through your door. The phone is answered by a live person around the clock, not a voicemail tree. And if a repair we make fails within one year, we come back at no charge. That is the Garrison Standard, and it applies to every inspection and repair we perform in San Fernando. Hank Delano has built the team around that code.
Dispatch is coordinated from our Los Angeles office, which keeps scheduling tight for San Fernando homeowners. You’ll get a two-hour arrival window, and the price quoted over the phone is the price on the invoice.
Styles & brands we work with





Chimney Flue Inspection in San Fernando
A chimney flue inspection in San Fernando is a focused look at the inner liner that channels smoke and combustion gases out of your house. In most cases, we run a camera up the flue and inspect every foot of the liner for cracks, gaps, or glazed creosote. This is not a surface-level glance. It is a documented, photo-by-photo assessment of the one part of your chimney you cannot see from the hearth. A flue inspection typically runs $249 – $389 when camera work is included.
What the Camera Actually Reveals
The camera shows what a flashlight never will: hairline cracks in clay tile liners, spalling from decades of heat cycling, and separation at mortar joints. In San Fernando’s dry climate, flue tiles contract during long summer heat spells and expand in winter wetness. Over 50 or 60 years, that repeated movement cracks tiles. On older clay liners near San Fernando Road, we often see vertical fissures running two or three tiles deep.
When a Flue Inspection Becomes Urgent
If you have a gas furnace or water heater venting into a chimney that also serves a fireplace, a cracked flue liner is a carbon monoxide pathway into your living space. That is not a scare tactic; it is physics. We recommend a flue inspection any time you change appliances, notice draft problems, or have not had the chimney looked at in more than three years.
Chimney Fire in San Fernando
A chimney fire in San Fernando is almost always caused by creosote ignition, and the homes most at risk are the older ranches with unlined or clay-tile flues and heavy wood-burning history. Third-degree creosote, the hard, shiny glaze that forms from low-temperature fires, burns extremely hot once it ignites. A brush cannot remove it. Inspecting for glazed creosote before you light the first fire of the season is the single most effective way to prevent a chimney fire here.
What We Check Before You Burn
Our inspection includes a full look at the smoke chamber and flue for creosote buildup, cracked tiles, and blockages like bird nests or debris. In San Fernando, where winter rains are infrequent but drenching, water intrusion through cracked crowns speeds creosote formation. We check the crown and flashing too. A standard inspection with camera runs $249 – $389, and if we find third-degree creosote, we show you the footage.
After a Chimney Fire
If you have already had a chimney fire, do not use the fireplace until a professional has inspected it. The extreme heat can crack flue tiles and warp chimney caps. We inspect for structural damage and document everything with photos. Repairs, if needed, are quoted in writing and guaranteed for one full year under the 365-Day Done Right Promise.
Trusted Brands We Service in San Fernando
We work with professional-grade chimney materials from names you can verify: Olympia Chimney, Famco, and Copperfield. When a flue needs relining, we specify DuraFlex liners sized to the exact flue dimensions, not whatever happens to be on the truck. For homes in San Fernando with spalling clay tile liners, a HeatShield resurfacing can often restore the flue without a full rebuild. We stock common parts locally, which means faster turnaround when your inspection turns up a repair need.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Inspection Problems We See in San Fernando Homes
- Cracked clay tile liners from seismic settling. San Fernando sits in a seismically active Valley, and homes built in the 1940s – 1960s often have tile liners with hairline fractures that only a camera reveals. These cracks can allow heat and gases to reach combustible framing.
- Third-degree creosote glaze in wood-burning fireplaces. The Valley’s mild winters lead homeowners to burn occasional, low-temperature fires. That produces hard, glossy creosote that a standard brush cannot remove, and it is a significant chimney fire risk.
- Gas appliances venting into stacks never designed for them. Many San Fernando ranch homes were built for wood-only fireplaces, then retrofitted with gas furnaces sharing the same flue. Without a proper liner, that is a carbon monoxide concern.
- Deteriorated mortar joints from dry heat and winter rain. Repeated expansion and contraction breaks down the mortar between bricks and flue tiles. We see this constantly on the older homes around San Fernando Road and Maclay Avenue.
Pricing for Chimney Inspection in San Fernando, CA
A Level 1 visual inspection in San Fernando runs $149. A Level 2 camera inspection, which includes full flue video and a written photo report, runs $249 – $389. The spread comes down to flue height, accessibility, and whether we are inspecting one flue or two (a fireplace plus a furnace flue, for instance). Level 3 inspections, which involve opening up a portion of the chimney structure, are quoted case by case. Every quote is written and approved by you before any work starts. Call (661) 430-6125 for an exact price on your San Fernando home.
We Also Serve Cities Near San Fernando
Our Chimney Inspection crews cover the surrounding Valley communities, including Sylmar, Mission Hills, Granada Hills, and Panorama City. If you’re in one of those neighborhoods, the same written-price guarantee and camera-verified reporting apply. You can learn more about our work in the area on our San Fernando service page.
Serving San Fernando, CA - Our Local Coverage Area
We’re based in the San Fernando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in San Fernando
Because most homes here were built between the 1940s and 1970s with clay tile flue liners that have been through decades of seismic settling. A Level 1 visual check cannot see inside the flue where those cracks live. A Level 2 camera inspection shows every inch of the liner on video, and that is the only way to verify whether the chimney is safe to use. Call (661) 430-6125 to schedule.
The dry heat bakes moisture out of mortar, and seismic activity stresses the bond between bricks and flue tiles. During an inspection, we look specifically for crumbling mortar, gaps at the tile joints, and any sign that the chimney has shifted. These are common findings in San Fernando homes, and they are repairable when caught early.
Yes. Third-degree creosote is the hard, shiny glaze that forms when wood fires burn at low temperatures over long periods. We identify it during a camera inspection, show you the footage, and explain removal options in writing. A brush will not touch it. The price for removal is quoted before we start.
Expect a camera run up the full length of the flue, with live footage you can watch as we go. In the older neighborhoods near San Fernando Road, we regularly find vertical cracks in original clay tiles. We document every crack, then walk you through what is cosmetic versus what needs repair. You decide based on what you see.
Brick chimneys deteriorate whether you use them or not. San Fernando’s heat cycles crack mortar and tile, and rainwater entry through a cracked crown accelerates the damage. If a gas furnace vents into the chimney, a cracked flue is a carbon monoxide risk even when the fireplace sits cold. An annual inspection catches these issues before they become expensive or dangerous. Call (661) 430-6125 for a free estimate.
Written by Hank Delano, Owner at Flint Chimney Co Santa Clarita, serving San Fernando through the Garrison Partners family since 2002.